Implement the Finite Element Modeling heat transfer model shown on slides XXXXXXXXXXWhen programming...

Question

Implement the Finite Element Modeling heat transfer model shown on slides XXXXXXXXXXWhen programming the cell formulas, be careful with the nodes at the end of the rod.(2) Run your model using the initial conditions shown on the slide (node 5 temperature = 1.000, all other nodes’ temperature XXXXXXXXXXfor 5 time steps (not counting the initial state, which is time t = 0). Use the same ?t and ?x values as in the example the slides.(3) Repeat for these different initial conditions: node 3 temperature = 5.000, all other nodes’ temperature 0.000.

David · Accepted Answer

Exercise instructions 2.2 FEM 
Prerequisite:  Slides 2.69-2.75 
(1)  Implement the Finite Element Modeling heat transfer model shown on slides 2.71 - 2.74.  When 
programming the cell formulas, be careful with the nodes at the end of the rod. 
(2)  Run your model using the initial conditions shown on the slide (node 5 temperature = 1.000, all other 
nodes’ temperature 0.000) for 5 time steps (not counting the initial state, which is time t = 0).

Implement the Finite Element Modeling heat transfer model shown on slides XXXXXXXXXXWhen programming the cell formulas, be careful with the nodes at the end of the rod.(2) Run your model using the...

Solution

Answer To This Question Is Available To Download

Related Questions & Answers

Submit New Assignment