Prepared by: Dr Rajan Kadel XXXXXXXXXXModerated by: Dr Deepani Guruge XXXXXXXXXXMarch 2023
Assessment Details and Submission Guidelines
Trimester T1 2023
Unit Code BN301
Unit Title Industry Based Project 1
Assessment
Type
Individual and Group
Assessment
Title
All assessment marking guides are attached herewith
Purpose of the
assessment
(with ULO
Mapping)
At the completion of these assessments, students will be able to:
a. Develop and apply research methods and analytical, technical, managerial and
time-management skills to the analysis and design of a capstone project.
. Identify and evaluate project management concepts and apply them to a
ealistic business problem
c. Research, adapt and apply the knowledge and skills acquired over the core units
to plan a substantial capstone project
d. Demonstrate effective communication skills in relation to client, ethical and
professional behaviour
e. Work effectively and efficiently in a team, and exercise coordination within a
team
Weight 100%
Total Marks 100
Word limit N/A
Due Date XXXXXXXXXXAs per assessments
Submission
Guidelines
• All work must be submitted on Moodle by the due date along with a completed
Assignment Cover Page.
• The assignment must be in MS Word format, 1.5 spacing, 11-pt Cali
i (Body)
font and 2 cm margins on all four sides of your page with appropriate section
headings.
• Reference sources must be cited in the text of the report, and listed
appropriately at the end in a reference list using IEEE referencing style.
Extension If an extension of time to submit work is required, a Special Consideration
Application must be submitted directly in AMS. You must submit this application
three working days prior to the due date of the assignment. Further information is
available at:
http:
www.mit.edu.au/about-mit/institute-publications/policies-procedures-
and-guidelines/special-considerationdeferment
Academic
Misconduct
Academic Misconduct is a serious offence. Depending on the seriousness of the
case, penalties can vary from a written warning or zero marks to exclusion from the
course or rescinding the degree. Students should make themselves familiar with the
full policy and procedure available at:
https:
www.mit.edu.au/about-mit/institute-publications/policies-procedures-
and-guidelines/AcademicIntegrityPolicyAndProcedure
For further information, please refer to the Academic Integrity Section in your Unit
Description.
http:
www.mit.edu.au/about-mit/institute-publications/policies-procedures-and-guidelines/special-considerationdeferment
http:
www.mit.edu.au/about-mit/institute-publications/policies-procedures-and-guidelines/special-considerationdeferment
BN301 Industry Based Project 1 Page 2 of 7
Prepared by: Dr Rajan Kadel XXXXXXXXXXModerated by: Dr Deepani Guruge XXXXXXXXXXMarch 2023
Assignment Description and Marking Guide for BN301 Industry Based Project 1
Individual Report: Assignment 1, 2 and 3 has individual marks component for each
student. This will be based on individual contributions and submission of the report
as follows:
Week 5 (Week 1- 4) Attendance and Participation
/ 4 Marks
Self and peer-evaluation Report
/ 8 Marks
Week 9 (Week 5- 8) Attendance and Participation
/ 4 Marks
Self and peer-evaluation Report
/ 8 Marks
Week 11 (Week 9-11) Attendance and Participation
/ 3 Marks
Self and peer-evaluation Report
/ 6 Marks
All Assessments will be marked by both project supervisors and unit lecturer.
Assessment Task Due Date % Weightage
Client details with project proposal Week 2
(02/04/2023)
0%
Assignment 1 Group report: Project plan and design*
and Individual Report
Week 5
(23/04/2023)
20%
Assignment 2 Group report: Report and demonstration
of design prototype* and Individual Report
Week 9
(21/05/2023)
30%
Assignment 3 Group report: Final Report* and
Individual Report
Week 11
(04/06/2023)
40%
Assignment 4 Group presentations Week 8 & 12
(During the class)
10%
TOTALS 100%
*Within a group task, a number of subtasks will be assigned to individuals by the project
supervisor. This, along with a peer-evaluation of individual contributions to the project,
will be used to assess individual outcomes.
Individual marks will be calculated for each assignment as follows:
For example:
Group x receives marks for assignment 1 report = 16/20
Individual Marks based on attendance (Supervision and Common Class) & participation, and
individual report (Self and peer-evaluation)
Member 1 = 10/12
Member 2 = 12/12
Member 3 = 7/12
Member 4 = 0/12
Total marks for each member is calculated as follows for assignment 1
Member 1 = 10/12 X 16 = 13.3 / 20
Member 2 = 12/12 X 16 = 16 / 20
Member 3 = 7/12 X 16 = 9.3 / 20
Member 4 = 0/12 X 16 = 0/20
BN301 Industry Based Project 1 Page 3 of 7
Prepared by: Dr Rajan Kadel XXXXXXXXXXModerated by: Dr Deepani Guruge XXXXXXXXXXMarch 2023
Client details with project proposal – Due in Week 2
Assignment 1 Project plan and design – Due in week 5
Sections Description Max Marks
1. Introduction Is the topic introduced appropriately, and is there an
overview of the report given in this Section?
1
2. Problem domain
and research
questions
Is there a specific research problem identified? Are the
esearch questions relevant?
2
3. Background and
Project Objective
Has literature review been conducted well on the chosen
topic (such as quality of the papers, variety of
publications, including journals and conferences)?
Is the summary of the literature review clear, specific and
does it capture the essence of the literature review
conducted? Is the summary of all papers reviewed
included in Appendix II: Literature Review Summary?
[each student should refer minimum of 2 (one journal,
one conference) peer-reviewed papers]
Does this section specifies objectives of the project in a
clear and concise manner?
1
7
1
4. Project plan and
design
Does this section include details requirements
specifications?
Does it include a list of project requirements: Are there
clear project requirements such as hardware, software,
etc?
1
2
References Are citations and references given co
ectly in IEEE
style?
4
Appendix I Is Client Details with contact name’s signature and
project proposal included?
1
Total Marks 20
Individual
Marks
Attendance (Common class and supervisor meeting) and Participation
(week 1-4)
AND
Individual (Self and peer-evaluation) Report (week 1-4)
4
8
12
Assignment 1 total marks for each member is calculated based on individual marks for weeks 1 to 4.
BN301 Industry Based Project 1 Page 4 of 7
Prepared by: Dr Rajan Kadel XXXXXXXXXXModerated by: Dr Deepani Guruge XXXXXXXXXXMarch 2023
Assignment 2 Report and demonstration of design prototype - Due week 9
Sections Description Max Marks
Comments
updates
Does this section give details of the following?
• Summary of the updates according to the assignment
1 feedback/comments that are provided by
supervisors/unit lecturer in Appendix III.
4
5. Report and
demonstration
of design
prototype
Does the document address the following?
• Table of weekly activities
• Roles & responsibilities of each team member (in
detail)
• Gantt chart appropriate to the project
• High level Project Design with diagram
• Project design prototype: Project with block diagrams
step by step (you can use UML/Use cases/flow
charts)
• Budget with references (detailed budget with
specifications) – include hardware, software, human
esources, etc.
XXXXXXXXXX
2
3
4
12
3
Total Marks 30
Individual
Marks
Attendance (Common class and supervisor meeting) and
Participation (week 5-8)
AND
Individual (Self and peer-evaluation) Report (week 5-8)
4
8
12
Assignment 2 total marks for each member is calculated based on individual marks for week 5 to 8.
BN301 Industry Based Project 1 Page 5 of 7
Prepared by: Dr Rajan Kadel XXXXXXXXXXModerated by: Dr Deepani Guruge XXXXXXXXXXMarch 2023
Assignment 3: Final report marking guide – Due week 11
(The final report includes Updated version of Assignments 1 and 2 reports
plus marks for additional sections as given below)
Sections Description Max
Marks
Comments
updates
Does this section give details of the following?
• Summary of the updates according to the
assignment 2 feedback/comments that are
provided by supervisors/unit lecturer in
Appendix IV.
8
6. Methods to
e used for
the next
stage of the
project
Does this section give details of the following?
• Roles & responsibilities of each team member
to be used in next part of the capstone project.
• Step by step methods to be used for BN304
(include detailed plan for implementation with
specific technique /technology /software
applications /hardware etc.)
4
10
7. Conclusion
Limitations
and Future
work
Does this section give details of the following?
• Conclusion
• Clear and concise limitations to
implementation plan for BN304
• Future work
2
4
2
Report
format
Is the final report formatted co
ectly? Are there
appropriate references and in-text citation in the
eport?
6
Appendix V Are ACS CBOK elements mapped appropriately to the
project description and justified?
4
Total Marks 40
Individual Marks Attendance (Common class and supervisor
meeting) and Participation (week 9-11)
AND
Individual (Self and peer-evaluation) Report
(week 9-11)
3
6
9
Assignment 4 total marks for each member is calculated based on individual marks for week
9 to week 11.
Assignment 4: Group presentation - Due in weeks 8 and 12
Description Max Marks
Group Presentation
Due week 8
Oral presentation
5
Group Presentation
Due week 12
Final Presentation and submission of
video file on Moodle
5
Total Marks 10
BN301 Industry Based Project 1 Page 6 of 7
Prepared by: Dr Rajan Kadel XXXXXXXXXXModerated by: Dr Deepani Guruge XXXXXXXXXXMarch 2023
Individual Report Format and Information
Self (Reflective journal) and Peer-evaluation report
Due week 5, 9 and 11
1. Common Class and supervisor meeting attendance and participation = 1 Mark for each week.
2. Write summary of weekly activities in 2-3 paragraphs in each section (D, E, E, P) in one reflective
journal table. (4 Marks for assignment 1 and 2 and 3 Marks for assignment 3)
Item Description
Describe
How effectively did you work and contribute to your group?
Explore:
List at-least 2 of your contributions to the project. Were your behaviours
valuable or detrimental to the team? Explain.
Evaluate:
How do you justify your valuables/contributions (at least 2) to the team and at
least one detrimental to the team?
Plan:
What did you learn about working in a group from this project that you will
ca
y into your next group experience?
3. Peer evaluation: Write peer evaluation report.
Write the name of each of your group members in a separate column. For each person, indicate the extent
to which you agree with the statement on the left, using a scale of 1-4 (1=strongly disagree; 2=disagree;
3=agree; 4=strongly agree). Total the numbers in each column