Great Deal! Get Instant $10 FREE in Account on First Order + 10% Cashback on Every Order Order Now

COVER SHEET © Copyright by Back to Basics Business Training Pty Ltd – National Training Provider Number 4346 Date of Revision: January 2018 Code: CIVCA Course: CPC40208 Certificate IV in Building and...

1 answer below »
COVER SHEET
© Copyright by Back to Basics Business Training Pty Ltd – National Training Provider Number 4346
Date of Revision: January 2018
Code: CIVCA
Course: CPC40208 Certificate IV in Building and Construction (Contract Administration)
Module: 4 Contract Selection & Administration
Assessment: 3 Prepare A Contracts Management Procedures Manual Page 1 of 10
ASSESSMENT TASK 3
PREPARE A CONTRACTS MANAGEMENT PROCEDURES
MANUAL
COVER SHEET

(This form must be attached to the front of your assessment submission)

SURNAME

GIVEN NAMES

MAILING ADDRESS

XXXXXXXXXXP/C

HOME/WORK MOBILE

Declarations

I, the undersigned, have read and understood the terms and conditions on the rear of this form
applicable to requirements for assignment content and submission, and confirm that the attached
submission content is my own work, and meets all of the assignment requirements to the best of
my knowledge.

Candidate Declaration of Authenticity

I declare that this Assessment Task is my own and contains no material written by another person
except where due reference is made. I am aware that a false declaration may lead to the withdrawal
of a qualification.

I have been advised of the assessment requirements for this module, and been made aware of my
ights and responsibilities as part of the assessment process.

I have read the Assessment Instructions

I declare that, to the best of my knowledge and belief, this assessment is my own work, all sources
have been properly acknowledged, and the assessment task contains no plagiarism.
Signed: Date:

Sending In Assessment Book & Assessment Tasks
Please mail your completed Assessment Task to:
P O Box 118 Wallsend NSW 2287
OR Email PDF version to:
XXXXXXXXXX
mailto: XXXXXXXXXX
Contract Selection & Administration
© Copyright by Back to Basics Business Training Pty Ltd – National Training Provider Number 4346
Date of Revision: January 2018
Code: CIVCA
Course: CPC40208 Certificate IV in Building and Construction (Contract Administration)
Module: 4 Contract Selection & Administration
Assessment: 3 Prepare A Contracts Management Procedures Manual Page 2 of 10
IMPORTANT INFORMATION – PLEASE READ

Students are advised that while there are no set due dates for the completion of the assessment
tasks required, please work towards completing the unit/module within a 4-6 week period. If you
equire more time to complete your tasks please call Back to Basics and an extension can be
easily a
anged. Assessment Extensions: Should a student require extra time to complete the
assessment due to extenuating circumstances, they may apply in writing (email is sufficient) with
a copy of their Photo ID, to Back to Basics for an extension. Extensions may be granted at Back
to Basics discretion up to a maximum of 4 weeks.

ASSESSMENT TASK – SUBMISSIONS

Note: Assessment Tasks may require further research on the internet.

All assessments must have the Assessment Cover Sheet attached to the front and signed by the
student, acknowledging the terms and conditions. DO NOT RETYPE THE DOCUMENT COVER
SHEET. IT MUST BE COMPLETED ON THE ORIGINAL DOCUMENT.

ASSESSMENT CONTENT

The contents of the Assessment MUST be your own work. You may confer with other
students, but you must not copy and submit the contents, or any part of another person’s work.
Back to Basics retains a copy of each assessment task submitted and will compare works if it is
very similar to, or the same as another submission. The copying and submitting of another
person’s work as your own is plagiarism. Any student found guilty of this will be required to
submit a new assessment. Serious offenders will be disqualified with no refund of any fees paid.

All submissions must be your own work - do not just copy the words from the text or duplicate
the form examples provided. Design your own form using the examples as a guide.

Unsuccessful Assessments/Resubmissions
Assessments: When a student has not successfully completed an assessment task, the
assessment task will be returned to the student with guidance and comments for successful
completion. The resubmission must be received by Back to Basics within 4 weeks of the
assessment date.

Copies of Completed Assessments
Assessment originals will be emailed to the student along with the Results Sheet. Back to Basics
will retain a copy of each assessment task submission on file.

Copies of Assessment Tasks are available – however the request must be in writing, and upon
application, Photo ID must be produced.

DO NOT just copy information from a website and insert it as your own work. Name the title of
the information and acknowledge the website/organisation/autho
publisher etc.
Contract Selection & Administration
© Copyright by Back to Basics Business Training Pty Ltd – National Training Provider Number 4346
Date of Revision: January 2018
Code: CIVCA
Course: CPC40208 Certificate IV in Building and Construction (Contract Administration)
Module: 4 Contract Selection & Administration
Assessment: 3 Prepare A Contracts Management Procedures Manual Page 3 of 10
The presentation of the document is most important.

Hard Copy:

 NO STAPLES PLEASE! Documentation to be bound by paperclip, bulldog (foldback) clip,
nalclips, etc.

 Documents may be presented in a Sheet Protector (plastic sleeve), manila file, cardboard
folder, or any other folder with the exception of those with spine width exceeding 2.5cm.

 Paper is to be no larger than standard A4 or foolscap size.

 All sheets are to be single sided (e.g. no printing on the back of a page) unless you are
including pre-prepared
ochures or documents.

 Assignment pages must be numbered. (Typed or hand written).

Electronic Copy:
 Save a backup copy first. It is very important to save your work as you go and prior to
submitting.

 Ensure all required fields are filled and completed.

 Click the Finalise Assessment button only when you are ready to submit as this will
finalise your assessment and you cannot make any further changes. Your assessment will
ecome a completed document that cannot be edited from this point on.

 Save the assessment to your computer. In another file to your backup copy so that you DO
NOT copy over and lose the original un-finalised copy should you want to make any
changes.

 Once saved please open an email and attach your assessment to the email.

 Now email your assessment to XXXXXXXXXX

 Once we have received your submission you will receive a reply email sent to you advising
the assessment has been received. Should you not obtain a conformation email within 24
hours of submitting your email, please contact Student Support on XXXXXXXXXXor
XXXXXXXXXX

Appeal
Each assessee has the right of appeal. The appeal is to be stated in writing along with a copy of
their Photo ID to the Manager of Back to Basics. The appeal is to be investigated and processed
y the CEO. The principles stated under the policies for unsuccessful assessments may apply.
Should the Assessee not be satisfied with the results of the appeal, an independent assessor /
mediator is to reassess the process of appeal. The decision of the independent assessor will be
final.
mailto: XXXXXXXXXX
mailto: XXXXXXXXXX
Contract Selection & Administration
© Copyright by Back to Basics Business Training Pty Ltd – National Training Provider Number 4346
Date of Revision: January 2018
Code: CIVCA
Course: CPC40208 Certificate IV in Building and Construction (Contract Administration)
Module: 4 Contract Selection & Administration
Assessment: 3 Prepare A Contracts Management Procedures Manual Page 4 of 10
PRESENTATION

All submissions must be your own work – Do not just copy the words from the text – unless you
are quoting a section from the relevant Acts or Legislations. If you use another organisation’s
material – you must have evidence (letter or reference) to state you actually developed all or part
of the material – and that you actually implement the material on a regular basis.

The presentation of the document is also important. The final document MUST be presented in a
professional format – Insert page numbers and add a contents page.

Your presentation is a major component of this part of the submission. Poorly presented
submissions will be assessed as Not Yet Competent and returned for resubmission.

“Tackling an Assessment Task”

There’s no doubt that a lot of reading is required to undertake this course. That means that
there’s a lot of re-reading and refe
ing to the text material required, when undertaking many of
the Assessment Tasks. This Module Advice offers some guidance as to how this can be
approached in an orderly way, so that the volume of the material and the task becomes more
easily manageable.

1. Re-Read the Assessment Task. Sometimes the assessment task suggests which
particular text topics are relevant. Often others may also be relevant

2. Look over the text. Scan down the Index/Contents pages at the front of the text and
look for headings that sound on-topic for the Assessment Task. Mark or tag them.

3. Set up a table (on the computer, or with pencil and scri
le paper or on a whiteboard or
utchers’ paper if you like). In the left hand column, list the individual points that the
Assessment Task asks you to address.

4. Re-read the sections of the texts that you have identified in 2. Look for clues about
each individual point you have listed in the left
Answered Same Day Aug 23, 2021

Solution

Tanmoy answered on Aug 25 2021
145 Votes
Assessment Task 3: PREPARE A CONTRACTS MANAGEMENT PROCEDURES MANUAL
Part A
Procedure to administer all the clauses in a building contract:
For execution of a building contract the contract document must be signed by the contractor and owner. If either of the parties does not sign the designer will insure that the documents are signed by both the parties.
Then the contractor will visit the owner’s site and personally identified and verified the conditions and requirements as per the contract documents.
All the documents like drawings, specifications and other documents prepared by the designer are to be retained by the owner and none of the documents can be retained by the contractor and subcontractor, except for a copy of contract record set by the contractor. But, the contract record set will be handed over to the owner on completion of the work.
During the work in progress the contractor may require extension of time which is a change in the date for completion of work. This alternation occurs due to circumstances which are uncontrollable by the Contractor. In such case the client will require to change the contract documents and pay compensation to the contractor both in time and money.
There may be cases where variations happen during construction of the project. It will be a written agreement between the contractor and the owner and will require additions and deductions which will need few modifications of work, rea
angement of resources and changes in the time and cost for completion of the work.
The owner will not release the entire money to the contractor until the entire tasks are completed. He will use the retention strategy where he will release only upto 50% of the total contract price on practical completion of the project and will pay the remaining amount on final completion of the project.
During the progress of the work, the proprietor will assess and maintain the contractor’s claim for the tasks completed by them. This is known as progress claim. The contractor claims based on each tasks completed and is an auto generated claim number is generated which is against the whole contract. Hence, the tasks are
oken down into individual claims amounts.
There may be cases where the project is practically completed ba
ing few minor changes and defects. There may be reasonable factors due to which the contractor is not rectifying the works. Here, documents and other information under the contract documents has handed over to the owner of the project.
There can be circumstances due to which the project owner can suspend the works by suspending the payment of the contractor. On the other hand, the contractor can suspend the work on grounds of employer’s
eaches discovered by him. Since there is close association between suspension and termination of work and either parties to the contract must make the provision for termination of the contract at the end of the agreed suspension period.
There will be a statutory wa
anty which is an implied law in the contract between the contractors and the tradespersons that all the tasks and works will be performed in a manner as specified in the contract document. It also states that all the materials, supplies and work will be in compliance with the Home Building Act. The wa
anty is for a period of seven years and during disputes with the builder the owner should follow dispute resolution procedure.
During the progress of the work any defects discovered by the owner of the project is the liability of the Contractor although the defect was caused by sub contractors. Hence, for sub-contractor it is a no defects liability because the rights and duties of the sub-contractor are not governed by the owner contract documents. Hence, any defect works by sub-contractor and supplier is the sole responsibility of the contractor to rectify the defects.
During the construction process it can happen that the contractor...
SOLUTION.PDF

Answer To This Question Is Available To Download

Related Questions & Answers

More Questions »

Submit New Assignment

Copy and Paste Your Assignment Here