Technical Report (Practical assignment)
You need configure SNMP by using packet tracer with the below information:
Topology:
1. Build the Network and Configure Basic Device Settings
2. Configure SNMP Manager and Agents
XXXXXXXXXXPC-PT T105 consider as SNMP-Manager
Other devices which are necessary for monitor consider as SNMP-Agents
(routers and switch)
Routers, the SNMP community string is ciscoRouter, with read-only
privileges.
Switches, the SNMP community string is ciscoSwitches, with write-read-only
privileges
3. Discover SNMP agents.
Discover which interfaces are up and which are down (Record the OID code
numbers and their co
esponding message translations)
4. Change SNMP agents configuration
Change the name of switch S105 to
idge
Change the switch S104 interface mode from up to down
Which information could not gather?
Define a SNMP community string is ciscoR, with write-read-only privileges in
the R105
Change the slot1 mode to down
Which information could not gather?
Useful information about configuration can be find in the Catalyst 3750-X and 3560-X
Switch Software Configuration Guide (chapter 35):
https:
www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3750x_3560x/software
el
ease/12-2_55_se/configuration/guide/3750xscg/swsnmp.pdf