Great Deal! Get Instant $10 FREE in Account on First Order + 10% Cashback on Every Order Order Now

Task Description You are hired by Advanced Medicos Limited (AML), a healthcare product sell company, as a cybersecurity consultant to help in security management and to address the contemporary and...

1 answer below »
Task Description You are hired by Advanced Medicos Limited (AML), a healthcare product sell company, as a cybersecurity consultant to help in security management and to address the contemporary and emerging risks from the cyber threats the company is facing. AML is providing a platform for Australian customers to sell their products online. The vision of the company is to be among the top 5 nationwide. The board from the advice by Chief Information Officer (CIO) and Chief Information Security Officer (CISO) has concluded that they should get to the point that the essential services such as web portal should be able to recover from major incidents in less than 20 minutes while other services can be up and running in less than 1 hour. In case of a disaster, they should be able to have the Web portal and payroll system fully functional in less than 2 days. The company is a new company which is growing rapidly. While the company uses its database server to store the information of its customers’ private data, credit card info, etc. it has a poordesigned network with a low level of security. As the company is responsible for the privacy and the security of customer personal info, credit card details, the security of payment transactions, etc. they have decided to improve their information security. Therefore, they have hired you to do the following task: You need to write a reflective report to the CEO of the company and explain the outcome of your Business Impact Analysis (BIA). In addition, you should develop a policy for BIA. CMP73001-Ass 4 Assignment-4 guideline Task 1: In this assignment, you should review the vulnerability assessment and the proposed controls in previous assignments and write a reflective report about BIA. You should analyse three business processes in AML Company: Credit Card Processing, Online Ordering, and Customers’ Record Maintenance. You are responsible for deciding about RTO, RPO, and MTD values for these processes. Then, you should discuss the impact on the business if these processes were unavailable. The impact can be critical, urgent, important, or normal. You should explain both customer and financial impact with proper justification. For this question, you should initially perform BIA for AML Company before implementing the controls. Then, in the second step, perform BIA analysis after implementing the controls and explain whether the controls are enough and effective. In your report, you should analyse how the controls that you implemented in Assignment 1 to 3 could affect these business processes. Table 1 provides an example of BIA for an example process. Table 1. BIA information Mission/Busine ss Process (Department) MTD RTO RPO Consequence of disruption Customer Impact (critical, urgent, important, or normal) Financial Impact (critical, urgent, important, or normal) Example1: Student record maintenance 72 hours 48 hours 12 hours Unable to provide student data to other faculties when requested Urgent (explain your reason) Important (explain your reason) Credit Card Processing Online booking Patients’ record maintenance Task 2: You should develop a BIA policy for AML Company. At least four (4) policy requirements should be provided. Assessment Criteria Criteria Max Mark Task 1: Reflective report about BIA 6 Task 2: BIA policy 3 Documentation 1 Total 10 CMP73001-Ass 4 Assignment-4 Marking Rubric A spreadsheet that will be used for the marking of your site is provided (attached with the final submission link) on MySCU to itemize exactly what tutors will be looking at in relation to marking your assignment. It contains a detailed breakdown of the marking criteria for this assignment. I strongly suggest you peruse this spreadsheet. Format, Presentation Submission Format and Length There is no report template to be used in this assignment, so you can design your template or refer to online resources. However, the report should be well presented in a standard report format. The first page of the report should have a simple company logo, your name, and student ID, CMP73001 Assignment 4, and the date you submit your assignment. When you have completed the assignment, you are required to submit your assignment in the PDF/DOC format. The file will be named using the following convention: filename = FirstInitialYourLastName_CMP730021_A4.pdf (i.e. FJones_CMP73001_A4.pdf) Due to the system setting constraint, the report 4 length/duration was set with 300 words in the unit UIG. You are advised that there is no formal word limit for the report. However, a good report is expected to be somewhere in the vicinity of 6,00 - 1,000 words from Introduction to Conclusion. Note that this is a very rough estimate, and there will be no penalties imposed based on the number of words (no real ceiling if the content is precise and relevant!) Original Work Note that you are not allowed to cut and paste from online resources. Use your own words and figures. Acknowledge all reference sources. It is a University requirement that a student’s work complies with the Academic Integrity Policy. It is a student’s responsibility to be familiar with the Policy. Failure to comply with the Policy can have severe consequences in the form of University sanctions. For information on this policy, please refer to Student Academic Integrity Policy at the following website: As part of a University initiative to support the development of academic integrity, assessments may be checked for plagiarism, including through an electronic system, either internally or by a plagiarism checking service, and beheld for future checking and matching purposes. CMP73001-Ass 4 A Turnitin link has been set up to provide you with an opportunity to check the originality of your work until your due date. Please make sure you review the report generated by the system and make changes (if necessary!) to minimise the issues of improper citation or potential plagiarism. If you fail to follow this step, your report may not be graded or may incur late feedback. Retain Duplicate Copy Before submitting the assignment, you are advised to retain electronic copies of original work. In the event of any uncertainty regarding the submission of assessment items, you may be requested to reproduce a final copy. School Extension Policy In general, I will NOT give extension unless where there are exceptional circumstances. Students wanting an extension must make a request at least 24 hours before the assessment item is due, and the request must be received in writing by the unit assessor or designated academic through student service (please visit for details). Extensions within 24 hours of submission or following the submission deadline will not be granted (unless supported by a doctor's certificate or where there are exceptional circumstances – this will be at the unit assessor's discretion and will be considered on a case by case basis). Extensions will be for a maximum of 48 hours (longer extensions supported by a doctor's certificate or alike to be considered on a case by case basis). A penalty of 5% of the total available grade will accrue for each 24-hour period that an assessment item is submitted late. Therefore, an assessment item worth 20 marks will have 1 mark deducted for every 24 hours and, at the end of 20 days, will receive 0 marks. Students who fail to submit following the guidelines in this Unit Information Guide will be deemed to have not submitted the assessment item, and the above penalty will be applied until the specified submission guidelines are followed. Marks and Feedback All assessment materials submitted during the semester will usually be marked and returned within two weeks of the required date of submission (provided that the assessment materials have been submitted by the due date). Marks will be made available to each student via the MySCU Grade book.
Answered Same Day May 28, 2021 CMP73001 Southern Cross University


Ritu answered on May 30 2021
148 Votes
Assignment 4: Reflective Writing
Student Name
Student ID
Task 1Reflective report about BIA    3
Task 2 BIA policy    3
References    6
Task 1Reflective report about BIA
    Consequence for disruption
    Customer Impact
    Financial Impact
    Credit Card Processing
    Unable to proceed with the transaction
    Customer will not able to make the transaction like not able to clear the bills with the credit card
    Online Booking
    Unable to provide the confirmation for the online booking
    Customer will not able to make the online booking
    Patient record Maintenance
    Unable to provide the patient record when desired
    Customer will not get his medical records
Task 2 BIA policy
The only purpose of the BIA is to prioritize as well as identify system components. It associates system components with business processes that the system can support, as well as then tries to extract the impact that will occur if such a system is missing. Advanced Medicos Limited's problem is that backup data could not be restored as well as there is a lack of a...

Answer To This Question Is Available To Download

Related Questions & Answers

More Questions »

Submit New Assignment

Copy and Paste Your Assignment Here