Great Deal! Get Instant $10 FREE in Account on First Order + 10% Cashback on Every Order Order Now

Review the followingLinkedIn Learning videosto help you with your assignments in this Unit. You are the IT manager of an Elementary School. The school is adding computers that have been donated by a...

1 answer below »

Review the followingLinkedIn Learning videosto help you with your assignments in this Unit.
You are the IT manager of an Elementary School. The school is adding computers that have been donated by a local company. An extended star topology has been suggested, using some hubs that are available. The school agrees with your idea of adding a switch working as a backbone switch, as shown in the figure below. The plan is to replace the classroom hubs as the budget allows.

For now, the very basic details are as follows:The Elementary Schoolis a four-year-old, single-level building with 12 classrooms and a library. Each classroom currently has 24 students but could possibly seat 32 students. There are currently no portable classrooms, but a student enrollment growth is just starting to hit the school.

Enough computers are available for six classrooms and the library immediately, and the intent is to outfit the remaining six classrooms next year. The plan is to make the Internet and some online services available to the students. The computers are current enough to be useful for at least two years.

The library, which is somewhat centrally located, is where the server(s) and router connecting the school to the Internet will be located. Assume that all rooms will have 24 computers and that each room will use a stackable hub solution that combines a 12-port hub and a 24-port hub for 36 total ports. Being stackable units, the network will see each stack as a single 36-port device.

  1. Review theroom requirements above. What type of network media is most appropriate for this situation?
  2. How many IP addresses does the school need immediately? How many might the school eventually need for the initial seven rooms? How many could it need if it gets enough computers for the entire school? Exact numbers aren't expected, but you should be able to estimate pretty close from the data provided.
  3. What class(es) of IP address do you need now and in the future?
  4. The school district informs the group that it can afford 2 public IP addresses for the Internet access. Is this a problem if the school wants all the computers to access the Internet? Explain why or why not.
  5. Research current prices of routers, cable, and switches. In some sites, you may have to choose Networking on the site's main page to get started. If you aren't familiar with manufacturers, focus on Cisco, 3Com, Novell, D-Link, and Linksys.
  6. Consider what happens if equipment goes down. Describe what could happen, and what should be done in each case, including how equipment is to be replaced, what is required to replace it (including configuration), and whether additional equipment could be kept on hand (and why).
  7. Each device must be explained and supported. Use sources (citation and reference) to support factual statements and provide evidence of your analysis and decisions.
Write a page paper using the APA style that answers these questions. The body of your paper must be at least five pages and not exceed six paged in length. Provide enough detail to fully support your opinion
Answered 2 days After Feb 28, 2022

Solution

Vibhav answered on Mar 03 2022
109 Votes
We can assume that the li
ary is located within the range of 10 meters at the central location with respect to the 12 classrooms. The Ethernet can be used as the most suitable and reasonable network media for the whole school to connect the switch with the rooms hubs. It would need the category 685/5e cable which can be used for offering the speed of 100 amps and one GBPS among the li
aries which and each of the room pubs which means that one 12 port and one 24 port hubs will be having the connection. If any of the classroom is farther than the limit of 100 meters from the li
ary then at that point. The Ethernet extender tool can be required on the minimal or a few kind of the fiber infrastructure could be required to set up the connection. Finally we can select the fiber infrastructure or the Ethernet extender as per the dependency over the interfaces which are available on the switch and the hubs. This Ethernet cabling can be used in the place as the hubs progressively get upgraded into the switches in the coming time.
Cu
ently there is no Internet access and there is one central switch and hubs at each of the 12 classroom. There is no IP address cu
ently but it is required immediately. The network behaves as the enormous layer for the network with which we can have communication load using the Mac addresses. If the Internet facilities are further added to the connection that each of the Internet service provider will assign single and unique public IP address to the router. The hubs are also substituted by their switches and we need to assign IP addresses to both the endpoints off computer and the switches. In this case we are able to layout the valuable transfer of the li
ary withinside the shape of distribution spine transfer and we are able to use thirteen...
SOLUTION.PDF

Answer To This Question Is Available To Download

Related Questions & Answers

More Questions »

Submit New Assignment

Copy and Paste Your Assignment Here