CS 280
Spring 2023
Programming Assignment 1
Building a Lexical Analyzer for the SPL Language
Fe
uary 16, 2023
Due Date: Sunday, March 5, 2023, 23:59
Total Points: 20
In this programming assignment, you will be building a lexical analyzer for small programming
language, called Simple Perl-Like (SPL), and a program to test it. This assignment will be followed
y two other assignments to build a parser and an interpreter to the SPL language. Although, we
are not concerned about the syntax definitions of the language in this assignment, we intend to
introduce it ahead of Programming Assignment 2 in order to determine the language terminals:
eserved words, constants, identifier(s), and operators. The syntax definitions of the SPL language
are given below using EBNF notations. However, the details of the meanings (i.e. semantics) of
the language constructs will be given later on.
1. Prog ::= StmtList
2. StmtList ::= Stmt ;{ Stmt; }
3. Stmt ::= AssignStme | WriteLnStmt | IfStmt
4. WriteLnStmt ::= WRITELN (ExprList)
5. IfStmt ::= IF (Expr) ‘{‘ StmtList ‘}’ [ ELSE ‘{‘ StmtList ‘}’ ]
6. AssignStmt ::= Var = Expr
7. Var ::= NIDENT | SIDENT
8. ExprList ::= Expr { , Expr }
9. Expr ::= RelExpr [(-eq|==) RelExpr ]
10. RelExpr ::= AddExpr [ ( -lt | -gt | < | > ) AddExpr ]
11. AddExpr :: MultExpr { ( + | - | .) MultExpr }
12. MultExpr ::= ExponExpr { ( * | / | **) ExponExpr }
13. ExponExpr ::= UnaryExpr { ^ UnaryExpr }
14. UnaryExpr ::= [( - | + )] PrimaryExpr
15. PrimaryExpr ::= IDENT | SIDENT | NIDENT | ICONST | RCONST | SCONST |
(Expr)
Free Hand Highlight
Based on the language definitions, the lexical rules of the language and the assigned tokens to the
terminals are as follows:
1. The language has general identifiers, refe
ed to by IDENT terminal, which are defined as a
word that starts by a letter or an underscore ‘_’, and followed by zero or more letters, digits, or
underscores ‘_’ characters. Note that all identifiers are case sensitive. It is defined as:
IDENT := [Letter _] {( Letter | Digit | _ )}
Letter := [a-z A-Z]
Digit := [0-9]
2. The language variables are either numeric scalar variables or string scalar variables. Numeric
variables start by a “$” and followed by an IDENT. While a string variable starts by “@” and
followed by an IDENT. Their definitions are as follows:
NIDENT := $ IDENT
SIDENT := @ IDENT
3. Integer constant is refe
ed to by ICONST terminal, which is defined as one or more digits. It
is defined as:
ICONST := [0-9]+
4. Real constant is a fixed-point real number refe
ed to by RCONST terminal, which is defined
as one or more digits followed by a decimal point (dot) and zero or more digits. It is defined
as:
RCONST := ([0-9]+)\.([0-9]*)
For example, real number constants such as 12.0, and 0.2, 2. are accepted as real constants, but
.2, and XXXXXXXXXXare not. Note that “.2” is recognized as a dot (CAT operator) followed by the
integer constant 2.
5. String literals is refe
ed to by SCONST terminal, which is defined as a sequence of characters
delimited by single quotes, that should all appear on the same line. For example,
‘Hello to CS 280.’ is a string literal. While, “Hello to CS 280.” Or ‘Hello
to CS 280.” are not.
6. The reserved words of the language are: writeln, if, else. These reserved words have the
following tokens, respectively: WRITELN, IF, ELSE.
7. The operators of the language are: +, -, *, /, ^, =, (, ), {, }, ==, >, <, . (dot), ** (repeat), -eq, -
lt, and -gt. These operators are for add, subtract, multiply, divide, exponent, assignment, left
parenthesis, right parenthesis, numeric equality, numeric greater than, numeric less than, string
concatenation, string repetition, string equality, string less-than, and string greater-than
operations, respectively. They have the following tokens, respectively: PLUS, MINUS,
MULT, DIV, EXPONENT, ASSOP, NEQ, NGTHAN, NLTHAN, CAT, SREPEAT, SEQ,
SLTHAN, and SGTHAN. Note that the string comparison operators -eq, -lt, and -gt are not
case sensitive.
8. The semicolon, comma, left parenthesis, right parenthesis, left
aces, and right
aces
characters are terminals with the following tokens: SEMICOL and COMMA, LPAREN,
RPAREN, LBRACES, and RBRACES, respectively.
9. A comment is defined by all the characters following the characters “#” to the end of line. A
ecognized comment is skipped and does not have a token.
10. White spaces are skipped. However, white spaces between tokens are used to improve
eadability and can be used as a one way to delimit tokens.
11. An e
or will be denoted by the ERR token.
12. End of file will be denoted by the DONE token.
Lexical Analyzer Requirements:
A header file, lex.h, is provided for you. It contains the definitions of the LexItem class, and
an enumerated type of token symbols, called Token, and the definitions of three functions to be
implemented. These are:
extern ostream& operato
(ostream& out, const LexItem& tok);
extern LexItem id_or_kw(const string& lexeme, int linenum);
extern LexItem getNextToken(istream& in, int& linenum);
You MUST use the header file that is provided. You may NOT change it.
I. You will write the lexical analyzer function, called getNextToken, in the file “lex.cpp”.
The getNextToken function must have the following signature:
LexItem getNextToken (istream& in, int& linenumber);
The first argument to getNextToken is a reference to an istream object that the function
should read from. The second argument to getNextToken is a reference to an integer that
contains the cu
ent line number. getNextToken should update this integer every time it
eads a newline from the input stream. getNextToken returns a LexItem object. A
LexItem is a class that contains a token, a string for the lexeme, and the line number as data
members.
Note that the getNextToken function performs the following:
1. Any e
or detected by the lexical analyzer should result in a LexItem object to be returned
with the ERR token, and the lexeme value equal to the string recognized when the e
or
was detected.
2. Note also that both ERR and DONE are unrecoverable. Once the getNextToken
function returns a LexItem object for either of these tokens, you shouldn’t call
getNextToken again.
3. Tokens may be separated by spaces, but in most cases are not required to be. For example,
the input characters “3+7” and the input characters “ XXXXXXXXXX” will both result in the
sequence of tokens ICONST PLUS ICONST. Similarly, The input characters
‘Hello’ ‘World’, and the input characters ‘Hello’’World’
will both result in the token sequence SCONST SCONST.
II. You will implement the id_or_kw() function. Id_or_kw function accepts a reference to a string
of a general identifier lexeme (i.e., keyword, IDENT, SIDENT, or NIDENT) and a line number
and returns a LexItem object. It searches for the lexeme in a directory that maps a string value
of a keyword to its co
esponding Token value, and it returns a LexItem object containing the
keyword Token if it is found. Otherwise, it returns a LexItem object containing a token for one
of the possible types of identifiers (i.e., IDENT, SIDENT, or NIDENT).
III. You will implement the overloaded function operato
. The operato
function accepts a
eference to an ostream object and a reference to a LexItem object, and returns a reference to
the ostream object. The operato
function should print out the string value of the Token in
the tok object. If the Token is either an IDENT, NIDENT, SIDENT, ICONST, RCONST,
SCONST, it will print out its token followed by its lexeme between parentheses. See the
example in the slides.
Testing Program Requirements:
It is recommended to implement the lexical analyzer in one source file, and the main test
program in another source file. The testing program is a main() function that takes several
command line flags. The notations for input flags are as follows:
● -v (optional): if present, every token is printed out when it is seen followed by its lexeme
etween parentheses.
● -nconst (optional): if present, prints out all the unique numeric constants (i.e., integer or
eal) in numeric order.
● -sconst (optional): if present, prints out all the unique string constants in alphabetical order
● -ident (optional): if present, prints out all of the unique identifiers in alphabetical order.
● filename argument must be passed to main function. Your program should open the file
and read from that filename.
Note, your testing program should apply the following rules:
1. The flag arguments (arguments that begin with a dash) may appear in any order, and may
appear multiple times. Only the last appearance of the same flag is considered.
2. There can be at most one file name specified on the command line. If more than one filename
is provided, the program should print on a new line the message “ONLY ONE FILE NAME
IS ALLOWED.” and it should stop running. If no file name is provided, the program should
print on a new line the message “NO SPECIFIED INPUT FILE.”. Then the program should
stop running.
3. If an unrecognized flag is present, the program should print on a new line the message
“UNRECOGNIZED FLAG {arg}”, where {arg} is whatever flag was given. Then the
program should stop running.
4. If the program cannot open a filename that is given, the program should print on a new line
the message “CANNOT OPEN THE FILE arg”, where arg is the filename given. Then the
program should stop running.
5. If getNextToken function returns ERR, the program should print “E
or in line N
({lexeme})”, where N is the line number of the token in the input file and lexeme is its
co
esponding lexeme, and then it should stop running. For example, a file that contains an
invalid real constant, as .15, in line 1 of the file, the program should print the message:
E
or in line 1 (.15)
6. The program should repeatedly call getNextToken until it returns DONE or ERR. If it
eturns DONE, the program prints the list of all tokens if the “-v” is specified, followed by
the summary information, then handles the flags “-idents”, “-nconst”, and “-sconst” in this
order. The summary information are as follows:
Lines: L
Total Tokens: M
Identifiers: N
Numbers: O
Strings: P
Where L is the number of input lines, M is the number of tokens (not counting DONE), N is
the number of identifiers tokens (e.g., IDENT, NIDENT, and SIDENT), O is the number of
numeric constants, and P is the number of string literals. If the file is empty the value of L is
zero, and the following output message is displayed.
Lines: 0
Empty File.
7. If the -v option is present, the program should print each token as it is read and recognized,
one token per line. The output format for the token is the token name in all capital letters (for
example, the token LPAREN should be printed out as the string LPAREN. In the case of the
tokens IDENT, and NCONST the token name should be followed by a space and the lexeme
in parentheses. In case of the token SCONST, the token name should be followed by a space
and the lexeme between single quotes (‘’). For example, if an identifier “$circle” and a string
literal ‘The center of the circle through these points is’ are recognized, the -v output for them
would be:
NIDENT ($circle)
SCONST ‘The center of the circle through these points is)
8. The -sconst option should cause the program to print the label STRINGS: on a line by itself,
followed by every unique string constant found, one string per line with single quotes, in
alphabetical order. If there are no SCONSTs in the input, then nothing is printed.
9. The -nconsts option should cause the program to print the label NUMBERS: on a line by
itself, followed by every unique numeric constant found, one number per line, in numeric