Instructions
As a network engineer for Kamehameha Institute, you will need to become familiar with the Packet Tracer simulation tool from Cisco. Packet Tracer is used to simulate and test network configurations. This allows you to work out and improve upon the settings before implementing them.
Using the diagram and configuration information from your first task, create a Packet Tracer simulation.
How Will My Work Be Evaluated?
1.1.3: Present ideas in a clear, logical order appropriate to the task.
10.1.1: Identify the problem to be solved.
10.1.2: Gather project requirements to meet stakeholder needs.
10.1.3: Define the specifications of required technologies.
13.1.1: Create documentation appropriate to the stakeholder.
13.2.1: Evaluate vendor recommendations in the context of organization requirements.
network infrastructure design template
Network Infrastructure Design Template for Kamehameha Institute
Part 1: Complete the Router Networking Tables
Table 1 lists the cu
ent Router Networking and Information for the organization. For your Part 1, use the information in this table to complete Tables 2, 3, and 4 below. Add additional rows if necessary.
Table 1: Cu
ent Router Networking and Information
Site numbe
Honolulu Site Route
1
Management VLAN
IP XXXXXXXXXX
Production VLAN
IP XXXXXXXXXX
Internet VLAN
IP-
IP Assignments
Loopback XXXXXXXXXX/32
VPN Tunnels
TBD - based on requirements
Hilo Site Route
2
Management VLAN
IP XXXXXXXXXX
Production VLAN
IP XXXXXXXXXX
Internet VLAN
IP-
IP Assignments
Loopback XXXXXXXXXX/32
VPN Tunnels
TBD - based on requirements
Lihue Site Router
3
Management VLAN
IP XXXXXXXXXX
Production VLAN
IP XXXXXXXXXX
Internet VLAN
IP-
IP Assignments
Loopback XXXXXXXXXX/32
VPN Tunnels
TBD - based on requirements
Table 2: Honolulu Site 1
Net ID
Usable Range
Subnet Mask
CIDR Value
Broadcast
XXXXXXXXXX
XXXXXXXXXXto XXXXXXXXXX
XXXXXXXXXX
/24
XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXXto XXXXXXXXXX
XXXXXXXXXX
/24
XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXXto XXXXXXXXXX
XXXXXXXXXX
/32
XXXXXXXXXX
Table 3: Hilo Site 2
Net ID
Usable Range
Subnet Mask
CIDR Value
Broadcast
XXXXXXXXXX
XXXXXXXXXXto XXXXXXXXXX
XXXXXXXXXX
/24
XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXXto XXXXXXXXXX
XXXXXXXXXX
/24
XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXXto XXXXXXXXXX
XXXXXXXXXX
/32
XXXXXXXXXX
Table 4: Lihue Site 3
Net ID
Usable Range
Subnet Mask
CIDR Value
Broadcast
XXXXXXXXXX
XXXXXXXXXXto XXXXXXXXXX
XXXXXXXXXX
/24
XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXXto XXXXXXXXXX
XXXXXXXXXX
/24
XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXXto XXXXXXXXXX
XXXXXXXXXX
/32
XXXXXXXXXX
Part 2: Design the Network Infrastructure
Create a network drawing using Visio or Draw.io, specific to this organization listing the network’s topology.
In your diagram, include any necessary hardware. The drawing should include enough detail to show the interconnections of the topology. You should label the networks well on your diagram. The viewer should be able to understand the Kamehameha Institute network environment and be able to implement the architecture you have developed.
All devices require hostnames and should use the following naming conventions:
· Routers: Rx; where x is the site numbe
· Switches: Sx; where x is the site numbe
· Include necessary details for high availability.
· Any external source that is consulted should be cited properly.
When you are finished, save the diagram as a PDF and submit it to the Assignment folder along with this template.
Note: You will need to use this diagram in Project 3, so save the source file.
1
2