ITC560_Assignment_2_Help_file-BM
Assignment 2-Packet Tracer – Connect and Configure IoT Devices to a Registration Server
for a Smart Office
1. Download file named Registration server Packet tracer from https:
static-course-
assets.s3.amazonaws.com/I2PT/en/index.html# XXXXXXXXXXonce you log on to
netacad.com
2. Save the file as StudentID_Firstname_ITC560.pkt
3. Add a registration server and set it up for IoT network
i. Add a registration server
a. Place the Generic server onto the workspace.
. Find the Generic server in the End Devices Selection box and drag it
to the workspace (Select End Devices-> Generic Server)
ii. Connect the Registration Server.
a. Using a Copper Straight-Through cable, connect the server to the
Wireless Router through the cable internet and cable modem.
iii. Enable the registration server service.
a. Click the Registration Server in the workspace to open the
Registration Server configuration window. Click the Services tab and
then click the IoT service in the left pane. Click the “On” button to
enable the service.
iv. Configure the registration server.
a. Click the Config tab. In the Global Settings window change the Display
Name to StudentID_Name_IoT Registration Server (Your studentID
and your name followed by Registration Server) and change the
DHCP/DNS IPv4 setting from the default Static to DHCP.
. Verify that the server has received an IPv4 address from the Home
Gateway by clicking the Desktop tab and then the IP Configuration
icon.(My server IP address is XXXXXXXXXX, yours could be different).
Please note your IP address for your server. Close the Registration
Server window.
4. Register Tablet to the Registration Server
i. Click the Tablet icon to open the Config tab. Select Wireless tab from left.
Enter OfficeNetwork for SSID. Then select WPA2-PSK and enter PSK Pass
Phrase as Student ID. AES is automatically chosen for Encryption. If not select
AES from drop down menu.
ii. Click the Web Browser icon in the Desktop tab. Enter the IPv4 address of the
Registration Server in the URL box and then click Go.
iii. Because there is no IoT account created yet, one will need to be created. Click
the Sign up now option.
iv. Select a username(Your StudentID) and password (Your Student ID) and then
click Create to create the IoT account.(It is a must only your studentID should
e chosen for both username and password)
v. No devices show up under the URL box as we have not set up IoT Server –
Devices window there are no IoT devices listed. This is because all the devices
are still registered with the Home Gateway.
5. Set up Wireless Router at office
i. Select Config tab then Settings tab on the left. Set Display Name as StudentID
Wireless Router.
ii. Select Wireless tab from left. Enter OfficeNetwork for SSID. Then select
WPA2-PSK and enter PSK Pass Phrase as Student ID. AES is automatically
chosen for Encryption. If not select AES from drop down menu.
iii. Follow 6.ii for all end devices (IoT) connected to the wireless router.
6. Configure the Smart Devices to register with your Registration Server.
i. Click the Device icon in the workspace to open the device configuration
window
ii. Click the I/O Config tab-> Network Adapter->choose PT-IOT-NM-1W(This is a
wireless network adapter).
iii. Next Config tab.
a. Select Wireless tab from left. Enter OfficeNetwork for SSID.
Then select WPA2-PSK and enter PSK Pass Phrase as Student
ID. AES is automatically chosen for Encryption. If not select
AES from drop down menu (As in 6.ii).
. Select Setting tab from the left under the Config tab. Set
Display Name as Smart Device. Set Gateway/DNS IPV4 to
DHCP. Change the IoT Server type from Home Gateway to
Remote Server. Enter the IP address of the
StudentID_Name_IoT Registration Server and the IoT account
Username (Student ID) and Password(Student ID) created
.Next, click the Connect button. Once connected you will see
Refresh button.
iv. Now do step 5.i, you should be able to see the device listed under your URL
once you log in with username StudentID and password StudentID..