Microsoft Word - ITAP1004-Assignment-2018.docx
Victorian Institute of Technology Pty Ltd
ABN: XXXXXXXXXXRTO No: XXXXXXXXXXTEQSA ID: PRV XXXXXXXXXXCRICOS Provider Code: 02044E
Semester 1 – 2018 ITAP1004 – Website Development Page 1 of 5
Student ID:
Full name:
ITAP1004 Website Development
Due date: Fri Week 13 before 5:00PM
Submit your work on Moodel in Assignment folder
50% deduction for Late Submission within one week
0 mark for Late Submission more than one week
0 mark for duplicated Submission or Shared Work
You will be marked based on your submitted file on Moodle. You are most welcome to check your file with
your lab tutor before your submission. No excuse will be accepted due to absence from lecture or lab
classes where details of lab requirements may be given.
Please make sure that you attend Lec/Tut EVERY WEEK as low attendance may result in academic
penalty or failure of this unit.
READ THE FOLLOWING GUIDELINES CAREFULLY AND UNDERSTAND ALL
REQUIREMENTS BEFORE STARTING THIS ASSIGNMENT
Assessment Overview
You are to develop from the beginning a web site about yourself with regard to accommodation.
This web site provides certain required details about your experience in accommodation in which
you have stayed. You will design and develop your web site with Notepad/Notepad++, HTML,
Java Script and CSS.
This assignment is worth 25% of the total marks for the unit. Students complete the assignment
individually.
Description
The purpose of this assignment is for you to build a web site that will contain some details about
accommodation you have had experience with, e.g., the number of hotels you have stayed in, the
number of bedrooms in your cu
ent accommodation, etc.
Victorian Institute of Technology Pty Ltd
ABN: XXXXXXXXXXRTO No: XXXXXXXXXXTEQSA ID: PRV XXXXXXXXXXCRICOS Provider Code: 02044E
Semester 1 – 2018 ITAP1004 – Website Development Page 2 of 5
This assignment involves creation of three HTML files co
esponding to the three pages of your
web site and all are connected to an external CSS file. You will need to determine how your site
will be designed and then you will develop the pages using HTML, Java Script and CSS.
The pages and CSS file you will develop are explained below.
Home page (.HTML file)
The first page of your site the user sees will be a home page. This page will be a welcome to the
site. You will explain to the user what the site is about. The content of the page will include at least
two paragraphs. An appropriate heading must be placed at the top of the page indicating what the
page or site is about.
The word limit for this page, excluding the heading, is 130 – 150 words. You must keep the number
of words within this range.
In the home page, add two links for “Accommodation details” page and “About Us”
page.
NOTE: All pages must have links to the other pages.
Past Accommodation details page (.HTML file)
Begin this page with an appropriate heading (as all pages of the site will have) reflecting that this
page deals with details about accommodation. Do not use “Accommodation details” in the
heading but use another title for your heading.
Cu
ent accommodation details page (.HTML file)
This page conveys certain aspects about the booking details.
Like the previous page, show a heading at the top of the page. Do not use “Cu
ent accommodation
details” in the heading text but use some other title.
Cascading Style Sheet
Use CSS file for formatting used for all web pages.
Other
Ensure that you use appropriate names for all files of the site. Avoid file names that reflect that
they are about a university assignment, but instead reflect what their purpose is in the site.
Also ensure that file contents are laid out properly and neatly and that all code is indented
consistently and properly.
Victorian Institute of Technology Pty Ltd
ABN: XXXXXXXXXXRTO No: XXXXXXXXXXTEQSA ID: PRV XXXXXXXXXXCRICOS Provider Code: 02044E
Semester 1 – 2018 ITAP1004 – Website Development Page 3 of 5
Important issues
Do not include any images in your site. Using images from other sites where permission is not
granted will violate copyright associated with those images. No marks are being awarded for use
of images so there is no benefit in including images.
It is without a doubt that students could be able copy text or other material from the other sites and
include it, as it is, in their own sites. This would be a clear case of plagiarism. Plagiarism is a form
of academic dishonesty that in this case would involve theft of material, and this would result in
penalisation of the student.
To avoid students plagiarising material from other sites, and therefore prevent penalisation of
students, all content that is used in the student’s site must be totally written in their own words.
It is not allowable for students to use the source material, in the form it has been written at the
source site, within the student’s site.
Assignment Mode
Students ca
y out the assignment individually. Students must not share any part of their work with
each other.
Victorian Institute of Technology Pty Ltd
ABN: XXXXXXXXXXRTO No: XXXXXXXXXXTEQSA ID: PRV XXXXXXXXXXCRICOS Provider Code: 02044E
Semester 1 – 2018 ITAP1004 – Website Development Page 4 of 5
Marking Scheme
You must test that your pages work in the
owser. It is recommended to test each page on multiple
owsers. Note below that there are marks for getting the pages to work in the
owser and you
must debug any e
ors to avoid loss of marks.
Home page
Content XXXXXXXXXX
Page viewable (i.e., actually works) in
owser XXXXXXXXXX
Accommodation details page
Introductory paragraph XXXXXXXXXX
Table XXXXXXXXXX
Page viewable (i.e., actually works) in
owser XXXXXXXXXX
Cu
ent accommodation details page
Introductory paragraph XXXXXXXXXX
Numbered list XXXXXXXXXX
Page viewable (i.e., actually works) in
owser XXXXXXXXXX
CSS
One external CSS applied to all pages XXXXXXXXXX
Other
Heading on every page XXXXXXXXXX
Relevant naming of all files used in site XXXXXXXXXX
Layout of and indentation within files XXXXXXXXXX
Total: XXXXXXXXXX
Deductions
Word count of home page and introductory paragraphs outside of range up to -3 marks
Notes:
• Make sure you have completed all lab work relevant to a particular aspect of the assignment
efore commencing work on that aspect of the assignment. Lab exercises are where learning,
e
ors and practice occur before embarking on a larger task (the assignment) worth many
marks.
Victorian Institute of Technology Pty Ltd
ABN: XXXXXXXXXXRTO No: XXXXXXXXXXTEQSA ID: PRV XXXXXXXXXXCRICOS Provider Code: 02044E
Semester 1 – 2018 ITAP1004 – Website Development Page 5 of 5
Assignment Submission
This assignment is due on Fri Week 13
Your submission will contain three HTML files and a CSS file. All of these files will be placed in
a relevant folder hierarchy and zipped for submission.
Please be clear that the unit coordinator will not be responsible for a student who is unable to
submit successfully working copies of files in their submission. The student will have no further
chance to submit files or receive any remarking, if this is the case. Make sure you have fully tested
your application before zipping and submitting. Your submission will be unzipped and placed into
the marker’s folder directory for marking, so keep this in mind.
If there is any exceptional case where a student’s assignment is unable to be marked, which should
not occur, the assignment will be marked out 10 and the student will receive this mark out 10 as
the final mark.
You will submit the zip file at the “Assignment folder on Moodle”. This form is shown to you
when you click on “Assignment” from the Assessment area. The form page contains the terms and
conditions of the assignment such as declaring that you have not plagiarised, have kept a copy of
your work, etc. In uploading and submitting your zip file, you are agreeing to these terms and
conditions, which you are being bound by in submitting work for the assignment and receiving a
mark for it.
The files are compressed into a zip file, called “Assignment_StudentID_Fullname”. If you
submit files separately (i.e., not in a zip file), then you may risk that Moodle will change the code
inside your files (for security reasons) and that, as a result, your files may not work. As should be
clear by now, such files will lose marks.
Note that the time of submission at the site as recorded in the unit coordinator’s area of Moodle
will be used as the official time of submission.
If you submit an assignment more than once (which is unusual and rarely would students do), then
the last one will be marked. If the last version is submitted during the lateness period, a lateness
penalty will be applied to that last version so that it will attract a penalty according to how many
days late it was submitted.
Assignments will not be accepted and marked 5 days after the submission deadline.
5% of the total assignment mark is deducted for each business day the assignment is submitted
late.