Assessment Details and Submission Guidelines
Unit Code BN202
Unit Title Internetworking Technologies
Assessment Type Individual Assessment - T XXXXXXXXXXAssignment 1)
Assessment Title Small Office Network Designing and Planning
Purpose of the
assessment (with
ULO Mapping)
Main objective of this assignment is to enable student to understand networking
devices, gather requirements for a given business case study and plan a network
design.
After successful completion of this assignment, students should be able to:
) Explain human factors in achieving business and technical goals through
planning and design.
c) Develop architectural internetworking design for the business and application
domains.
Weight 15% of the total assessments
Total Marks 50
Word limit XXXXXXXXXX
Due Date 30th April, XXXXXXXXXX:00)
Submission
Guidelines
All work must be submitted on Moodle by the due date along with a
completed Assignment Cover Page.
The assignment must be in MS Word format, 1.5 spacing, 11-pt Cali
i (Body)
font and 2 cm margins on all four sides of your page with appropriate section
headings.
Reference sources must be cited in the text of the report, and listed
appropriately at the end in a reference list using IEEE referencing style.
Extension If an extension of time to submit work is required, a Special Consideration
Application must be submitted directly to the School's Administration
Officer, in Melbourne on Level 6 or in Sydney on Level 7. You must submit
this application three working days prior to the due date of the assignment.
Further information is available at:
http:
www.mit.edu.au/about-mit/institute-publications/policies-
procedures-and-guidelines/specialconsiderationdeferment
Academic
Misconduct
Academic Misconduct is a serious offence. Depending on the seriousness of
the case, penalties can vary from a written warning or zero marks to
exclusion from the course or rescinding the degree. Students should make
themselves familiar with the full policy and procedure available at:
http:
www.mit.edu.au/about-mit/institute-publications/policies-
procedures-and-guidelines/Plagiarism-Academic-Misconduct-Policy-
Procedure For further information, please refer to the Academic Integrity
Section in your Unit Description.
http:
www.mit.edu.au/about
http:
www.mit.edu.au/about
http:
www.mit.edu.au/about-mit/institute-publications/policies-procedures-and-guidelines/special-considerationdeferment
http:
www.mit.edu.au/about-mit/institute-publications/policies-procedures-and-guidelines/special-considerationdeferment
http:
www.mit.edu.au/about-mit/institute-publications/policies-procedures-and-guidelines/special-considerationdeferment
http:
www.mit.edu.au/about-mit/institute-publications/policies-procedures-and-guidelines/special-considerationdeferment
http:
www.mit.edu.au/about-mit/institute-publications/policies-procedures-and-guidelines/special-considerationdeferment
http:
www.mit.edu.au/about-mit/institute-publications/policies-procedures-and-guidelines/special-considerationdeferment
http:
www.mit.edu.au/about-mit/institute-publications/policies-procedures-and-guidelines/special-considerationdeferment
http:
www.mit.edu.au/about-mit/institute-publications/policies-procedures-and-guidelines/special-considerationdeferment
http:
www.mit.edu.au/about-mit/institute-publications/policies-procedures-and-guidelines/special-considerationdeferment
http:
www.mit.edu.au/about-mit/institute-publications/policies-procedures-and-guidelines/special-considerationdeferment
http:
www.mit.edu.au/about-mit/institute-publications/policies-procedures-and-guidelines/special-considerationdeferment
http:
www.mit.edu.au/about-mit/institute-publications/policies-procedures-and-guidelines/special-considerationdeferment
http:
www.mit.edu.au/about-mit/institute-publications/policies-procedures-and-guidelines/Plagiarism-Academic-Misconduct-Policy-Procedure
http:
www.mit.edu.au/about-mit/institute-publications/policies-procedures-and-guidelines/Plagiarism-Academic-Misconduct-Policy-Procedure
http:
www.mit.edu.au/about-mit/institute-publications/policies-procedures-and-guidelines/Plagiarism-Academic-Misconduct-Policy-Procedure
Page 2 of 4
Assignment description
“Booksforyou” is a Retail Book Sale Company and having a small Li
ary which has been in business
for 10 years; specialising in Tertiary Cu
iculum from cu
ent text to archived and research material.
The proprietor has been reluctant to upgrade the manual system used in “Booksforyou”. But now
the proprietor has started to realise that he needs to do something to stay competitive in the market
place. Your company has been approached by “Booksforyou” to complete an analysis and quotation
for the upgrade of their information and data system.
Located in Melbourne CBD, organisation has 2 offices located within 1000 meters away from each
other. Office 1 has two floors and cu
ently 10 staff members are working including IT department,
Li
ary and Customer Support. Office 2 has only 1 floor and 5 members, mostly this office is used for
Sales and business meeting. At the moment, there is only desktop workstations are available
however client is looking for upgrading all workstations with laptops in Office 1 and replace all
outdated workstations with new desktops. There is also a need of 2 servers as client is expanding
usiness online and also required to have its own local database. A high speed internet connection is
available at both offices which is to be shared by the users of the network. Client is also requesting
wireless internet access at both offices.
Both offices has windows XP operating system connected in a peer-to-peer coaxial network with a
dialup modem and a HP Deskjet 990 Cxi that prints A4 receipts from a spreadsheet. This is cu
ently
used for their point of sales. They cu
ently have an Excel 2007 workbook on one PC that is shared.
This work book contains a spreadsheet for customers, a spreadsheet for books, a spreadsheet for
suppliers and a spreadsheet for books on hold. “Booksforyou” has estimated that the potential
growth of the company will increase at a rate of 28% for the next 3 years and they have possible
plans to open a third store in a different location in approximately 18 to 24 months’ time.
In your report include the following contents
1. Create a GAP report – (What the client has; what the client needs; what can be re-used and
what needs to be purchased, contracted or outsourced). Discuss with your Tutor for further
clarification.
2. Build a document giving all the necessary network designs (enough information should be
provided that will allow any technician to build your network structure from scratch).
3. Simple IP addressing solution (step by step workout of the calculations) that leaves room for
growth, is easy to administer and has the minimum wastage of available IP address space.
4. List all hardware and software specification of the selected devices.
5. Add screenshots with
ief explanation of Network device configuration:
A. Set hostname as your name
B. Set system clock to 10th April 201 10:00 am
C. Set IP Addresses on Incoming and Outgoing FastEthernet Interfaces of Router
D. Display name of the interfaces on Router
E. Display 6 IOS modes
Page 3 of 4
Marking Criteria
Section to be included in
the report
Description of the section Marks
Project Scope Outline of the report 5
Project Hardware and
Software Requirements
Name of the network devices with manufacturer’s
name, series, model and port numbers
Type of cables used in network design
Name of the server, PC with specification such as
operating system, RAM, hard disk etc
Name of Software’s required as per Client
Requirements
15
Network Design
Include a diagram of your designed network and write
justification of the design
15
Network Devices
Configuration
a. set hostname as your name
. set system clock to 10th April 201 10:00 am
c. set IP Addresses on Incoming and Outgoing FastEthernet
Interfaces of Router
d. display name of the interfaces on Router
e. display 6 IOS modes
10
Reference Style Follow IEEE reference style 5
Total 50
Page 4 of 4
Marking Ru
ic
Grade
Mark
HD
40-50
DI
35-39
CR
30-34
P
25-29
Fail
25
Excellent
Very Good
Good
Satisfactory
Unsatisfactory
Project scope
5
Concise and
specific to the
project
Topics are
elevant and
soundly
analysed.
Generally
elevant and
analysed.
Some
elevance and
iefly
presented.
This is not
elevant to the
assignment
topic.
Project
hardware and
software
equirements
15
Demonstrated
excellent ability
to think critically
and sourced
eference
material
appropriately
Demonstrated
excellent
ability to think
critically but
did not source
eference
material
appropriately
Demonstrate
d ability to
think critically
and sourced
eference
material
appropriately
Demonstrated
ability to think
critically and
did not source
eference
material
appropriately
Did not
demonstrate
ability to think
critically and
did not source
eference
material
appropriately
Network
Design
15
Logic is clear and
easy to follow
with strong
arguments
Consistency
logical and
convincing
Mostly
consistent
logical and
convincing
Adequate
cohesion and
conviction
Argument is
confused and
disjointed
Network
devices
configuration
10
All elements are
present and very
well integrated.
Components
present with
good cohesive
Components
present and
mostly well
integrated
Most
components
present
Proposal lacks
structure.
IEEE
Reference
style
5
Clear styles with
excellent source
of references.
Clear
eferencing
style
Generally
good
eferencing
style
Sometimes
clear
eferencing
style
Lacks
consistency
with many
e
ors